Steps Involved in the Roof Restoration Process

Roof Restorations

During a roof restoration, many steps are taken to ensure the safety of the building. A home will often require multiple contractors to carry out different parts of the project. Depending on the location of the roof, some repairs may be more difficult than others. Roofs are typically seen as a time-intensive proposition and can be easily damaged without proper care. Here are the steps of the roof restoration process.

Decide if Roof Restoring Is Necessary

The first step in the Roof Restorations Logan process is deciding whether or not your roof requires restoring. A roof assessment will help determine if the roof needs to be restored. This is typically done by a roof restoration professional. An inspection is performed to give an idea of the overall condition of the home’s roof. This should include an inspection of the roof structure and the shingles. The total area of shingles that need to be replaced will also be estimated.

Remove Damaged Shingles

Roof Restorations

Removing damaged shingles is usually the first step in a roof restoration project. Damaged shingles should be removed with a hammer. The nails can then be removed using a pry bar and hammer.

Clean the Roof

Cleaning the roof is an important part of the roof restoration process. Gravel and dirt should be rinsed away from the roof with water. This can be done with a garden hose or pressure washer. Cracks in the shingles should be patched up using a roof patch.

Stabilize the Roof

Stabilizing the roof should happen after the roof is cleaned and repaired. This will help prevent further damage and will also strengthen it for future use. The areas that need to be stabilized are usually at the middle of the roof, where there is most potential for damage.

Replace the Roof Shingles

The next step in the restoration process is to install new shingles. The new shingles should match the color and texture of the old ones. This will help prevent any cracks from forming as a result of incompatible shingles. The old nails should be replaced with galvanized nails and new screws for wooden roofs.